Engineering Blog — DevBriX Engineering

Featured

Category · Hardware | Jul 22, 2026

Industrial control boards: from schematic to volume production

Category · Process

PRODUCTION READY: THE ROAD FROM A WORKING BOARD TO THE FACTORY FLOOR

The gap between a prototype that works on the bench and a product you can actually manufacture is preparation. This piece walks the full DFM checklist, supplier selection and the validation plan you need before... Read more

A DFM checklist before you freeze the PCB layout Why 80% of delays come from component selection

Category · Firmware

Hot · Jul 12

FIRMWARE DECIDES HOW STABLE A MACHINE REALLY IS

Category · Tutorial

6 min · Jul 08

AGV/AMR | SLAM navigation and talking to the MES layer

All articles

Latest posts

Filter by the area you care about.

Hardware·8 min read

PCB design for motor control boards: 7 mistakes we keep seeing

Large current loops, ground planes split in the wrong place, decoupling caps parked too far from the IC pins — small layout mistakes that make a big impact.

Jul 18, 2026

Firmware·11 min read

RTOS or bare-metal on STM32 for industrial work?

The two approaches compared on response time, maintainability and validation cost, with a decision guide for each class of machine.

Jul 15, 2026

Mechanical & JIG·9 min read

Standardising inspection JIGs: from drawing to sign-off on the floor

How to build a fixture that repeats: choosing datums, setting sensible tolerances, and the acceptance form you hand over to the customer.

Jul 11, 2026

AGV/AMR·12 min read

LiDAR scan processing: Filtering point clouds in real-time

Handling noise and false positives in 2D LiDAR data for AGV navigation using computationally lightweight algorithms on edge devices.

Jul 05, 2026

Automation·14 min read

Calculating inverse kinematics for 6-axis robotic arms

A practical guide to math models and payload limitations when setting up reach and motion paths for industrial manufacturing cells.

Jun 28, 2026

Hardware·10 min read

Passing EMC: Practical shielding for radiated emissions

Understanding the difference between near-field and far-field emissions, and how to design metal enclosures that pass CE marking first time.

Jun 21, 2026

Newsletter

Get the monthly engineering note

One email a month: new articles, design notes and lessons pulled straight from live projects.